Chery Tiggo · model and finish guide

Choosing Chery Tiggo LED Door Sills

Choose the exact Tiggo model first, then compare the published finish, set and artwork on that vehicle route.

TIGGO Stainless sill on red painted metal directly against rubber seal; white lettering, bars and edge illumination — product visualization
Chery Tiggo 4 Stainless Steel product visualization with white TIGGO lettering, side lines and edge on grey brushed metal in a red crossover doorway. It is an automotive-context visualization, not a customer installation photo or exact-fit proof. Review the exact product listing.

Choose the Tiggo route first

Tiggo 4 and Tiggo 8 have separate product routes, artwork and threshold geometry. The examples below cover those two current model paths. If your vehicle is a Tiggo 2 or Tiggo 7, search for that exact model and year before ordering rather than treating a Tiggo 4 or Tiggo 8 plate as interchangeable.

Tiggo 4 · 2018–2026

The current Tiggo 4 Stainless description states 2018 through 2026. Its Matte PRO listing carries the same model route with body colour, highlight colour and set choices.

Tiggo 4 Stainless · Tiggo 4 Matte PRO.

Tiggo 8 · 2018–2026

Tiggo 8 uses its own logo and product route. Use its listing for the vehicle-specific set and artwork instead of adapting the Tiggo 4 example.

Tiggo 8 Stainless · Tiggo 8 Matte PRO.

The Stainless titles use an open-ended 2018 notation, while their current descriptions state 2018 through 2026. The Matte titles state 2018–2026. Confirm the live listing against your registration year when the boundary matters.

Read what each finish actually illuminates

The current descriptions give two different visual directions. Stainless records describe the logo, top light bars and side edge as illuminated. Matte PRO records describe illumination in the lettering and top lines, with the colour-matched edge and lower surface unlit. Keep those descriptions with the exact Tiggo model and listing.

Stainless Steel

Choose the light colour, Front or Front and Rear set, and Stainless Steel with Raptor Protection or the standard Stainless finish on the exact product page. The selected Tiggo 4 or Tiggo 8 route remains the fitment decision.

Matte PRO

Choose body colour, highlight colour and set. The catalogue image is a product illustration, not exact vehicle dimensions; the page says dimensions are selected for the vehicle during manufacture.

Artwork

Tiggo or Tiggo 8 lettering is the listed example. The Matte pages invite a custom-inscription enquiry, so send the exact model, year and short request for an individual feasibility and layout check.

Write the order brief around the vehicle

Record the Tiggo model, year, exact product URL, artwork, finish, set and colour choices. The current pages describe adhesive-backed wired accessories and door-activated circuit routing; they do not establish a universal connector, no-drill method or installation result.

  • Start with Tiggo 4 or Tiggo 8, or find an exact current route for another Tiggo model.
  • Confirm the listing’s year wording and the threshold area before selecting the set.
  • Keep Stainless light zones separate from the Matte lettering-and-lines description.
  • Use the exact model page for current artwork, dimensions, availability and any custom-inscription enquiry.

Browse the Chery collection after identifying the model route.