Land Rover LED Door Sills · model, generation and finish guide

How to Choose Land Rover LED Door Sills by Model, Generation and Finish

Match the Land Rover code, generation, years, finish and artwork before choosing a doorway set.

Discovery Stainless Steel sill on an exposed metal threshold, inner edge directly against the rubber seal — product visualization
Editorial visualization of the Discovery L319 Stainless plate seated on exposed green threshold metal, with its inner edge meeting the rubber seal directly. The stock plastic cover is removed from the mounting area. Not a customer installation photograph. Review the exact product listing.

Start with the vehicle code and generation

Land Rover names cover several doorway shapes. Discovery III and Discovery IV use the L319 code but different year ranges in the catalog; Discovery L462, Discovery Sport L550 and Freelander 2 L359 are separate routes. The image above shows the Discovery L319 / Discovery III Stainless listing for 2004–2009. Do not choose from the DISCOVERY or Land Rover badge alone.

Discovery L319 · 2004–2009

This is the exact Stainless route shown above, with DISCOVERY artwork and its own listing details.

Open Discovery L319 Stainless.

Discovery L319 Matte PRO

The current Matte listing is a separate finish reference for the same named route. Read its own artwork and year details rather than carrying assumptions from the Stainless visual.

Open Discovery L319 Matte PRO.

Discovery IV · 2009–2016

Keep this later L319 route separate from the selected 2004–2009 example.

Browse Discovery IV.

L462, Sport and Freelander

Discovery L462, Discovery Sport L550 and Freelander 2 L359 need their own current model, year and body listing. Range Rover routes are separate again.

Read the finish and light zones on the exact listing

The Discovery L319 Stainless listing describes the illuminated DISCOVERY lettering, two top-surface lines and thin side edge. The selected visualization shows a warm grey brushed face with white light in those areas; the green body, tan seat and black floor remain unlit. It is a product visualization, not customer installation or fitment evidence.

The separate Discovery L319 Matte PRO listing is a different surface reference. Use that product page for its own face, artwork and stated light treatment. Do not infer shared dimensions or a finished material comparison from the two listings.

Keep the artwork with the body route

The ready-made DISCOVERY wordmark is an example for the selected L319 product. If you want an expedition name, club mark or short dedication, send the exact Land Rover model, code, year, wording or artwork reference and intended layout. Ask whether it can be reviewed for that route; custom artwork remains an enquiry and does not change fitment.

Check the complete gallery for plate proportions, wordmark and door positions. A related Land Rover badge or a similar generation is not a substitute for the exact product page.

Check the doorway before fitting

Confirm the full model code and year first. Compare the complete supplied set with the intended door positions, dry-position each plate and follow the instructions supplied with the selected product. Keep the L319 2004–2009 record separate from the later L319, L462, Sport and Freelander routes.

Start with the Land Rover collection, then narrow to the exact Discovery or other model listing.