SEAT LED Door Sills · model and artwork guide
How to Choose SEAT LED Door Sills
Match the exact SEAT model, generation and body style before choosing the published finish, set and artwork.
Match the SEAT model and generation first
SEAT lettering does not identify the threshold application. The selected Stainless listing is for Leon III, while the linked Matte and Stainless examples are Ibiza KJ1 and Ateca KH7. Keep each model, generation and body route with its own product page. Arona needs its own current listing; do not infer its fitment from these three examples.
Leon III · Stainless example
The selected listing uses an open-ended 2013 title. Its handle and current description state 2013–2020, so treat the year wording as a confirmation point and do not extend the route beyond the supplied evidence.
Ibiza KJ1 · Matte example
The linked Matte PRO listing is SEAT Ibiza KJ1 2017–Present. Its body-color, highlight-color and set choices belong to the Ibiza route, not Leon or Ateca.
Ateca KH7 · Stainless example
The linked Stainless listing is SEAT Ateca KH7 2016–Present. Keep this SUV route separate from the Leon hatchback and Ibiza route.
Arona and other SEAT routes
Arona, other Leon generations and other body styles need their own current product route. A SEAT or Cupra graphic alone does not show which vehicle geometry the plate follows.
Read the finish and light zones on that route
The exact Leon III doorway visualization above is an editorial product visualization, not a customer installation or exact-fit proof.
The Leon III and Ateca Stainless records describe illumination through the logo, top light bars and side edge. The separate Ibiza Matte PRO record describes lettering and decorative lines on the top surface, with the edge and lower surface unlit. These examples are different SEAT applications, not a confirmed same-design material pair.
Vehicle route
Write Leon III, Ibiza KJ1, Ateca KH7 or another exact model and generation beside the product URL before comparing finish.
Years and set
Check the title and description together, then confirm FRONT or front-and-rear on the exact listing. Ask about any year conflict before ordering.
Artwork
SEAT, model-name and Cupra lettering are design choices in this catalogue. Artwork does not prove factory Cupra trim or change the vehicle route.
Use the exact product page as the order check
Compare the complete gallery with the vehicle, confirm the model code, body style, stated years, plate count, finish and artwork, then dry-position the selected set and follow the instructions supplied with that product. The product records describe wired accessories; they do not establish one universal connector, circuit or installation result.
- Match the full SEAT model, generation and body style.
- Check the Leon III year wording and ask for confirmation at the 2013–2020 boundary.
- Confirm FRONT or front-and-rear and the published logo or lettering.
- Keep Leon, Ibiza, Ateca and Arona records separate.
Start with the SEAT collection, then open the exact model listing. The Leon III collection and Cupra artwork collection are different browsing routes.
Keep custom artwork tied to the selected SEAT
The linked Ibiza listing exposes a custom-inscription enquiry. For Leon or Ateca artwork, send the model, year, body style, product URL and requested wording or artwork against the exact listing rather than assuming that the same option is available. Custom acceptance, layout, price and timing remain individual questions.