Ford Bullitt Type 1 or Type 2 LED Grille Badge?
The Ford Bullitt grille-badge catalog has two products with very different face proportions. Type 1 is listed as a 100 × 100 mm square face. Type 2 is listed as a 190 × 45 mm horizontal strip. They belong to the same named artwork family, but they answer different placement questions. Choose the shape you want to investigate, then verify the real grille opening and rear access.
These media files show the product designs on a plain background. They are not customer photographs and do not prove fitment to a Mustang generation, trim or other Ford grille.
Compare the shape, not just the Bullitt name
| Exact listing | Listed dimensions | What the measurement tells you |
|---|---|---|
| Ford Bullitt Type 1 | 100 × 100 × 52 mm | Compact, equal-width-and-height face |
| Ford Bullitt Type 2 | 190 × 45 × 52 mm | Nearly twice the width and less than half the height of Type 1 |
Both records list a 52 mm overall depth including mounting hardware, a plastic body, steel hardware, two screws, a backing plate and fixing nuts. The equal depth does not make the faces interchangeable. Measure the clear opening in both directions and keep the rear assembly in your plan.
When each proportion is worth comparing
Type 1 is the product to inspect when the available space can accept a compact square face. Type 2 is the product to inspect when you have a long, low band and want the Bullitt artwork to read horizontally. Those descriptions are visual comparisons only. They are not instructions to place a badge over a factory emblem or into a location that has not been checked.
Measure one usable mounting surface, not the whole grille. Check for curvature, grille bars, sensors, shutters and access behind the face. If the Type 1 square area or the Type 2 strip cannot sit without covering equipment, stop before drilling. A qualified installer can assess uncertain clearance and wiring access.
Select lighting after the design
Each current listing offers White, Red, Blue, Green, Yellow, Ice Blue, Purple and FLOW choices, together with 12- and 24-month warranty variants. The descriptions distinguish fixed-color illumination from FLOW RGB phone control through the LED Hue app over Bluetooth. Use the selector on the exact Type page. A color shown in the Type 1 gallery is not proof that Type 2 has the same price or option state.
Keep the Bullitt artwork decision separate from the name of the vehicle trim you own. The catalog title tells you which graphic to inspect; it does not say that the same face is an OEM replacement or that the mounting points match a factory emblem. If the goal is a visual comparison, choose the square or strip product first. If the goal is a physical installation, add the measurements, rear clearance and wiring review before ordering.
- Choose the artwork proportion you want: square Type 1 or horizontal Type 2.
- Compare its width and height with the measured face area.
- Allow for 52 mm overall depth, the backing plate and fixing nuts.
- Protect wiring connections during installation; IP67 for the badge does not remove that task.
- Keep the product link and exact Type name in the order notes.
Browse the LED Grille Badges collection for other Ford designs. “Bullitt” tells you which artwork family to inspect; it does not answer the vehicle-specific fitment question.
