Toyota Large Logo vs TEQ LED Grille Badge: Which Mark Should You Choose?
A Toyota grille-badge brief needs more than the make name. The current catalogue has a wide Toyota Large Logo record and a separate, compact Toyota TEQ record. Their source images show different marks and their listed face proportions point to different visual choices. Select the artwork you want first, then compare the exact measurements with your own grille. Neither product name proves vehicle fitment.
Compare the mark and the footprint
The Large Logo image visibly spells TOYOTA across a long horizontal face. The TEQ image is a stacked, angular mark that occupies a much taller shape. Those are not two crops of one generic Toyota badge; they are two exact product records with different artwork and dimensions.
| Exact listing | Listed dimensions | Current COLOR LOGO selector |
|---|---|---|
| Toyota Large Logo | 270 × 62 × 52 mm Width × height × overall depth including mounting hardware |
WHITE, RED, BLUE, GREEN, YELLOW, ICE BLUE, PURPLE or FLOW |
| Toyota TEQ | 100 × 85 × 52 mm Width × height × overall depth including mounting hardware |
WHITE, RED, BLUE, GREEN, YELLOW, ICE BLUE, PURPLE or FLOW |
Using the listed face width divided by height, the Large Logo is about 4.35:1, while TEQ is about 1.18:1. The useful buyer distinction is therefore wide and low versus compact and tall. Both pages list a 52 mm overall depth including mounting hardware, but that shared depth does not make the faces interchangeable.
Those proportions give you a better measurement brief than a catalogue thumbnail. Record the usable width and height at the proposed location, then compare them with the exact face dimensions. Do not scale either image from a screen or assume that a wide opening automatically solves the rear-clearance question. The horizontal and vertical limits, mounting access and depth all still belong to your vehicle-side check.
Choose the artwork before the selector
Choose Large Logo when your brief calls for the full TOYOTA wordmark and its 270 mm horizontal footprint. Choose TEQ when the angular TEQ mark and 100 × 85 mm face are the intended visual. Save the exact image, title and URL together. A note that only says “Toyota badge” can send an installer to the wrong artwork and the wrong face proportion.
Both records currently expose the same named fixed-color choices and FLOW value, but the option still belongs to the exact product page. The Large Logo description calls the choices fixed colors / FLOW RGB. The TEQ description says to choose an available fixed LED color and describes FLOW RGB as phone-controlled through the LED Hue app via Bluetooth. Do not use identical selector labels as evidence that the artwork or footprint is the same.
Measure the chosen face on the vehicle
After the artwork decision, compare 270 × 62 mm or 100 × 85 mm with the clear opening where the badge would sit. Check the depth behind the grille and access to the two-screw mounting arrangement listed on both pages. The product images provide design and context; they do not confirm a Toyota model, generation or grille position.
If the installation brief is being prepared for someone else, send the exact product URL with the measured opening rather than sending only a screenshot. That keeps the Large Logo or TEQ identity attached to its current dimensions and selector. If the mark is right but the opening or rear access is uncertain, pause for product-specific advice instead of switching to the other design by assumption.
- Write “Toyota Large Logo” or “Toyota TEQ” in the order note.
- Use the exact source image to confirm the visible mark.
- Copy width, height and 52 mm overall depth from the same page.
- Check the opening, curvature and rear access independently.
- Choose a fixed color or FLOW only from that product’s current selector.
For Toyota performance wordmarks, read the Toyota TRD versus TRDpro guide. Once the Toyota mark is settled, browse the LED Grille Badges collection and confirm the exact product page before ordering.
