Toyota Tundra · entry-surface design guide
Toyota Tundra LED Door Sills: Entry-Surface Protection and Design
Check the conflicting year wording, cab and threshold first, then compare the exact Stainless plate design and options.
Start with the year, cab and threshold
The selected product title says Toyota Tundra XK50 2007–2021, while its description says Toyota Tundra II 2007 through 2013. The page does not settle that difference for you. Send your exact year, cab and a clear threshold photo for confirmation before ordering.
For the broader model and cab check, use the Toyota Tundra fitment guide. This page focuses on the entry surface, design and care of the exact Stainless listing.
What the Stainless listing covers
The product description places each plate on the flat painted metal threshold and says it helps cover the entry area from everyday shoe marks and scuffs. The same description names logo, top light bars and side edge illumination, adhesive backing, trim-routed wiring and a door-activated circuit.
Material and light
The title identifies Stainless Steel. The description names the Tundra logo, top light bars and side edge as illuminated areas.
Entry surface
The described mounting area is the flat painted metal threshold. Check the actual doorway and clearance before adhesive contact.
Connection
The accessory is wired, with red positive and black negative wires. A door-activated circuit can switch the light when the door opens.
What remains open
The selected listing does not settle every cab or body configuration. Do not treat the logo or pickup silhouette as a fitment answer.
Compare the listed plate design
Choose the order options after fitment
Colour
WHITE, RED, Blue, GREEN, YELLOW, Ice Blue, PURPLE, FLOW are the COLOR choices shown on the listing.
Set
FRONT or FRONT+REAR are the SET choices. Confirm whether rear plates are needed for the actual cab.
Style
STAINLESS STEEL or STAINLESS STEEL+RAPTOR PROTECTION are the STYLE labels. Choose the listed finish after the threshold and body check.
Artwork
The Tundra lettering identifies the design. It does not resolve the year, cab or threshold match.
Keep the entry surface clear
- Compare the plate outline with the flat painted metal area before removing adhesive backing.
- Clean dust, grit, wax and moisture from the mounting area so the plate can sit flat.
- Inspect the edge and door clearance after a dry fit, especially where boots or gear cross the threshold.
- Keep abrasive dirt from collecting beside the plate and check the surface during routine cleaning.
- Route wires beneath trim without pinching them, then test door response before final adhesion.
These are entry-surface care steps. They do not turn the accessory into a universal truck part or establish protection beyond the described threshold area.
Use the exact path when ordering
Open the Toyota Tundra Stainless listing · Read the Toyota Tundra fitment guide · Browse the Tundra collection.
Send the truck’s year, cab and threshold photo before ordering if fit is unclear.
