Dodge Demon Type 1, Type 2 or Type 3 LED Grille Badge?
The three Dodge Demon grille-badge listings share a design family but not the same face shape. Type 1 and Type 2 are both 190 mm wide; Type 3 is much narrower and nearly square. That makes the buyer question more precise than “Which Demon badge fits?” First choose the artwork and proportion you actually want, then compare the exact product dimensions with the vehicle location.
The images are product-artwork references on a white background. They do not prove that a particular Dodge model, year or grille accepts any of the three products.
Read the proportions before reading the trim name
“Demon” identifies the artwork family, while the Type label identifies a separate catalog record. If you need a long, low face, compare Type 2 first. If you want a little more vertical face height at the same listed width, compare Type 1. Type 3 changes the decision completely: its 95 mm width and 100 mm height make it the only near-square option in this group.
| Exact product | Listed face and assembly | Material stated |
|---|---|---|
| Demon Type 1 | 190 × 62 × 52 mm | Acrylic plastic body; steel hardware |
| Demon Type 2 | 190 × 43 × 52 mm | Plastic body; steel hardware |
| Demon Type 3 | 95 × 100 × 52 mm | Plastic body; steel hardware |
Overall depth is listed as 52 mm for each and includes the mounting hardware. Keep that third measurement in the comparison: a face that looks suitable from the front may still need rear space for the backing plate, fixing nuts and wiring.
Let the opening decide what to investigate
Use the table to make a measurement plan, not a fitment promise. Measure the clear width and height at the intended grille location. Note whether the surface is curved, whether you can reach the back, and whether the proposed position sits near a sensor, shutter or cooling path. If the opening cannot provide the product’s face area while leaving safe clearance, that listing is not a good starting point.
Use the dimensions on the exact Type page and keep the proportions unchanged in your comparison. A Demon name on a car does not establish the shape or mounting space of its grille, and an illustrative product photo does not document a model-specific installation.
Lighting is another selector
All three current records list White, Red, Blue, Green, Yellow, Ice Blue, Purple and FLOW choices, with 12- and 24-month warranty variants. The descriptions distinguish fixed-color illumination from FLOW RGB phone control through the LED Hue app over Bluetooth. Select lighting after you choose the exact artwork. A colored image from Type 1 is not evidence that the same price or selector applies to Type 2 or Type 3.
- Choose Type 1 if its 190 × 62 mm proportion is the artwork and face height you want to compare.
- Choose Type 2 if the same 190 mm width with a lower 43 mm face is the better comparison.
- Choose Type 3 only after checking the separate 95 × 100 mm opening requirement.
- For any choice, inspect the 52 mm overall depth and rear access before ordering.
Compare all current options in the LED Grille Badges collection. If the grille location is uncertain, send the vehicle details and measurements to the team or have a qualified installer review it; the Demon name alone cannot answer fitment.
