LED Door Sills · Buyer guide
Where Do LED Door Sills Install?
An LED door sill overlay sits on the outer painted metal threshold, while the interior plastic trim stays in place. The permitted Toyota Tundra customer video gives a real installation reference: the frame sequence shows the mounting area, the steel plate and its lead, then the illuminated Tundra lettering.
The footage is customer evidence shared with permission. It does not identify the exact SKU, Tundra year, cab configuration, number of plates or LED colour.
Watch the Toyota Tundra installation video for the complete sequence.
What the installation frames show
Mounting surface: the outer painted metal threshold
The plate belongs on the prepared metal threshold beside the running board. The frame shows location and work in progress; it does not provide dimensions for every Tundra body or generation. Match your vehicle to the individual product page before ordering.
Surface preparation and adhesive placement should follow the supplied instructions. A customer frame cannot replace the fitment record.
Wiring: follow the kit instructions
The frame sequence shows a lead during the work. It does not establish a universal connection point or routing plan. Identify the door-activated circuit and connection method for the exact kit, and use a qualified installer when the electrical work is uncertain.
Checks before fitting
- Match the exact Tundra model, generation and cab configuration.
- Confirm the plate sits on the outer painted metal threshold.
- Check the selected logo, finish, light colour and set.
- Plan the cable route and door-activated connection from the supplied instructions.
Browse the Toyota Tundra LED door sill collection. It is a shopping reference; no individual product is identified as the exact kit in this customer video.
