Hyundai LED Door Sills · generation guide
Best LED Door Sills for Hyundai: Tucson, Santa Fe, Palisade and Sonata Fitment Guide
Match the Hyundai model and generation first, then compare the plate finish, light behaviour and installation details.
Start with the exact Hyundai generation
Tucson, Santa Fe, Palisade and Sonata cover different generations and threshold shapes. Open the exact product page before comparing finish or artwork; a model name alone does not guarantee that another Hyundai model will fit.
Use the named generation and product page for each model. If Santa Fe is your vehicle, contact us with your year and generation before choosing a sill.
Four Hyundai buying paths
Tucson
The product title says Tucson NX4 2020–Present and its description covers 2020–2026. That range is current through 2026; confirm a later vehicle with the store.
Open the exact product listing
Confirm a later vehicle with the store.
Santa Fe
No Santa Fe door-sill listing is confirmed. Do not use a license-plate badge or borrow a Tucson, Palisade or Sonata sill.
Browse Hyundai collection for an inquiry
Contact us with your year and generation to confirm a suitable door-sill product.
Palisade
The Stainless listing title says Palisade LX2 2018–2025, while its description says Palisade 2020–2026. Do not assume the newer generation or select a fit without confirmation.
Sonata
The exact links keep Sonata LF and DN8 separate. The DN8 title says 2019–Present, while its description says Sonata VIII 2020–2026. Confirm the vehicle generation and range with the store rather than choosing one by inference.
Open the exact product listing
Use the generation that matches the vehicle.
Product photographs and the Palisade doorway visualization
Compare the matching plate outline with the vehicle threshold before ordering.
Palisade: confirm the year and generation
The Stainless Palisade page is the product shown in the hero. Its product title presents the application as LX2 2018–2025, while the description says 2020 through 2026. Those statements do not prove that every vehicle in either range fits. Confirm the vehicle year and body generation with the store before ordering.
The Stainless description states that the plates mount on the flat painted-metal threshold, use adhesive backing, connect as wired accessories and can switch with a door-activated circuit. It also lists Front and Front + Rear sets and multiple light colours. Those details belong to this Stainless listing and are not transferred to an unverified Matte variant.
Open the Palisade Stainless listing before selecting a set or finish. Do not transfer installation promises from a different product page when the exact installation has not been verified.
Keep Tucson and Sonata generations separate
| Model | Exact linked generation | Buying check |
|---|---|---|
| Tucson | Tucson NX4 Stainless listing | The title says 2020–Present; the description covers 2020–2026. Confirm a later vehicle with the store. |
| Santa Fe | No exact Santa Fe door-sill listing confirmed | Contact us with your year and generation to confirm a suitable door-sill product. Do not substitute a badge or another Hyundai model. |
| Palisade | Palisade LX2 Stainless listing | Title says 2018–2025; description says 2020–2026. Confirm the year and generation. |
| Sonata | Sonata LF · Sonata DN8 | DN8 title says 2019–Present; its description says 2020–2026. Confirm the generation with the store. |
Use the shared installation checks carefully
The current guide’s useful installation baseline is simple: standard LED door sills sit on the outer painted-metal threshold, use adhesive after surface preparation, and route wiring beneath interior trim to a door-activated lighting circuit. That describes the installation question and does not make a plate suitable for another Hyundai model or replace factory plastic trim.
- Dry-fit the exact plates on the named generation and check door and seal clearance.
- Measure the low-voltage circuit instead of choosing a connection by wire colour alone.
- Check polarity, insulation, protection and door shutoff before final adhesion.
- Keep SRS connectors and orange high-voltage wiring outside the work area, and use a qualified installer when the circuit or trim route is unclear.
Use the measuring guide and the installation guide for preparation, then follow the exact product page for the selected model.
Compare finish after fitment
The Palisade detail in this guide uses the Stainless listing. If you are considering Matte PRO, verify its exact model, light zones, options and wiring on its own page. A matte appearance alone does not establish that it shares the Stainless product’s fit or installation.
Continue with the Hyundai collection
Browse Hyundai LED door sills, then open an exact Tucson, Palisade or Sonata generation page. For Santa Fe, contact us with your year and generation to confirm a suitable door-sill product. A license-plate badge is not a door-sill substitute.
