Subaru LED Door Sills · generation guide
LED Door Sills for Subaru: BRZ, Outback and Forester Fitment Guide
Match the Subaru body and generation first, then compare the exact logo, finish and set.
Start with the body, then the generation
BRZ is a coupe, Outback is a different body path, and Forester has its own generation plates. Match the body shape, generation, threshold and set before choosing the Subaru logo or finish.
A Subaru logo does not establish fit. Compare the plate outline, door opening and outer painted-metal threshold on the named vehicle.
Three Subaru paths with separate generation checks
BRZ ZD8
The selected BRZ Stainless listing identifies BRZ II ZD8 2021–Present in its title; its description covers 2021–2026. A separate broad BRZ listing uses a 2011+ title, so do not use that title to choose a ZD8 fit.
Open the exact product listing
Confirm the coupe generation before ordering.
Outback IV and VI
Outback IV and VI are separate products. The IV title says 2009+ while its description says 2009–2014; the VI title says 2019+ while its description says 2019–2026.
Open the exact product listing
Open the Outback VI listing · Confirm the body generation.
Forester SJ and SK
Forester SJ is listed for 2012–2018. Forester SK is listed for 2018–2024, and the exact SK Stainless product supplies the doorway visual for this guide.
Open the exact product listing
Open the Forester SJ listing · Confirm SJ or SK before ordering.
Compare the named product views
These images belong to named Subaru products. The lit and unlit Forester views show product lighting states; neither proves that another generation has the same plate geometry.
Keep the year evidence visible
| Model path | What the checked listings say | Before checkout |
|---|---|---|
| BRZ ZD8 | Selected title says 2021–Present; description says BRZ II 2021–2026. A separate BRZ title says 2011+. | Confirm ZD8 body and year instead of using the broad 2011+ title. |
| Outback IV | Title says 2009+; description says Outback IV 2009–2014. | Confirm the IV generation. |
| Outback VI | Title says 2019+; description says Outback VI 2019–2026. | Confirm the VI generation and finish page. |
| Forester SJ | Title and description identify 2012–2018. | Confirm SJ body. |
| Forester SK | Title and description identify 2018–2024. | Confirm SK body and year. |
Read the set and finish on the exact page
The BRZ ZD8 Stainless listing is Front Pair only. The Outback IV and VI plus Forester SJ and SK Stainless pages describe Front Pair or Front + Rear sets. The Outback VI Matte PRO page uses its own FRONT/FRONT+REAR, body-colour and illumination selectors, with top lettering illumination and an unlit matched edge. Do not transfer Matte selectors to the Stainless products.
| Product path | Product-level evidence | Buying check |
|---|---|---|
| BRZ ZD8 Stainless | Front Pair; Stainless colours and optional Black Raptor surface belong to this listing. | Confirm coupe generation. |
| Outback VI Stainless | Front Pair or Front + Rear; Stainless selectors belong to this listing. | Confirm VI body and set. |
| Outback VI Matte PRO | FRONT or FRONT+REAR; Matte body colour and illumination selectors belong to this page. | Do not infer Stainless geometry. |
| Forester SK Stainless | Front Pair or Front + Rear; Stainless selectors belong to this listing. | Confirm SK body and set. |
Check the threshold and wiring route
The named Subaru Stainless pages describe adhesive plates on the flat painted-metal threshold with wiring routed beneath trim to a door-activated circuit. The Matte page has its own wiring instructions. These details do not make another Subaru generation suitable.
- Dry-fit the exact plates on the named body and check door seal and clearance.
- Measure the low-voltage circuit instead of choosing a connection from wire colour alone.
- Check polarity, insulation, protection and door shutoff before final adhesion.
- Keep SRS connectors and orange high-voltage wiring outside the work area; use a qualified installer when the route is unclear.
Use the measuring guide and installation guide for preparation, then follow the exact model page.
Choose finish after fitment
Classic Stainless and Matte PRO are separate product paths. A matte appearance, similar logo or shared brand name does not prove shared geometry or lighting.
Continue with the Subaru collection
Browse Subaru LED door sills, then open the exact body and generation page. If the model year or threshold is unclear, ask for a fitment review before ordering.
