LED Door Sills · Audi A1–A7 model guide
Audi LED Door Sill Plates: A1–A7 Model and Fitment Guide
Choose the Audi model path first. Then verify the exact generation, logo, threshold, finish, set and wiring details on the product page.
Fitment comes before finish and artwork
Start with the Audi model, generation or chassis, years, body style and set configuration. Then open the exact product page and compare its sill shape, dimensions, logo area and wiring description with the vehicle.
The A4 B8 Sedan and A4 Allroad listings below are model-specific. They do not establish that an A4 product fits an A1, A3, A5, A6 or A7. Choose the model collection first, then confirm the exact listing.
Browse all Audi LED door sills · Read the Audi selection guide
A vehicle-specific entry detail
A correctly matched sill adds a defined logo area and door-activated illumination on the outer painted metal threshold. It should follow the opening profile instead of looking like a universal overlay. The product image and model path are the useful checks before ordering.
Exact Audi listings
These featured listings are Stainless Steel products. Each keeps its own model, years, logo, image and options.
- Audi A3 8VThe product description specifies 2012 through 2020 and an illuminated Audi A3 logo. The listing offers FRONT or FRONT+REAR and Stainless Steel or Stainless Steel+Raptor Protection.
- Audi A4 Sedan 8K2 / B8The product title identifies 2007–2015; its description identifies the A4 B8 range as 2007 through 2016. Confirm the year and body on the live listing before ordering. This exact listing uses the A4 logo.
- Audi A4 Allroad B8The product title says 2009+ and its description specifies 2009 through 2016. It uses the Allroad logo and has its own threshold shape and fitment range.
The alternate A4 S4-logo listing uses the same A4 Sedan 8K2 / B8 application wording: its title identifies 2007–2015 and its description identifies 2007 through 2016. Treat it as a different artwork option and verify its own product details before ordering.
Choose finish, lighting and set
The three featured listings share the Stainless Steel product structure. Select options on the exact product page rather than copying choices from another model.
Finish / style
These listings offer STAINLESS STEEL and STAINLESS STEEL+RAPTOR PROTECTION. Black Raptor is a protective coating over the same stainless-steel construction.
Lighting
Choose WHITE, RED, Blue, GREEN, YELLOW, Ice Blue, PURPLE or FLOW. The descriptions say the logo, top light bars and side edge illuminate; Flow RGB is smartphone controlled.
Set
Choose FRONT or FRONT+REAR, then confirm the selected plate dimensions for the exact threshold.
If you are considering Matte PRO, open the Matte PRO collection and confirm a listing for the same Audi model. Finish details from another model cannot establish fitment.
Install on the outer painted metal threshold
The product descriptions place the plates on the flat painted metal threshold with automotive-grade adhesive; they do not replace the interior plastic sill trim. Route the wires beneath the trim without pinching them.
- WiringThese are wired automotive accessories, not replaceable-battery products. Connect the positive and negative wires to a suitable vehicle power source.
- Door responseA door-activated circuit can switch the illumination on when the door opens. Verify the connection point for the exact Audi.
- Fit checkCompare the listed dimensions and threshold shape before removing the adhesive liner.
Read the Audi installation guide before fitting.
Choose the finish after fitment
Classic Stainless and Matte PRO are different construction and light-zone choices. The exact Audi listings used here document Stainless Steel products, including the optional Raptor coating. A finish label alone does not identify a vehicle match, and an image from one model cannot prove another model's threshold.
Browse Stainless Steel door sills · Browse Matte PRO door sills
Ask about custom artwork only after the model check
Names, short text, club marks or logos need a product-specific review. Send the vehicle, generation, product link and requested artwork so the team can confirm whether the design can be produced cleanly on the selected plate. A custom request does not establish fitment or mean every Audi listing supports the same artwork option.
Shop by Audi model
Use the collection path, then confirm the exact product.
Confirm sedan, Allroad or another body path.
Use the exact A5 product listing for fitment.
Use the exact A6 generation path.
No A7 product listing is used here; confirm the exact live product.
Continue with the Audi shopping paths
Audi LED Door Sills · Classic Stainless LED Door Sills · Matte PRO LED Door Sills
Audi LED door sill questions
Does the A4 product fit every Audi model in this guide?
No. The A4 Sedan and A4 Allroad listings are vehicle-specific. They do not establish fitment for A1, A3, A5, A6 or A7.
Should I choose the finish before the vehicle path?
No. Confirm the model, generation, body style, threshold and set first. Then choose the finish and lighting available on that exact product.
Where can I check current production and delivery information?
Read the current Shipping & Delivery policy for the selected product and destination.
