Genesis LED Door Sills · body-code guide
LED Door Sills for Genesis: G70, G80 and GV80 Fitment Guide
Match the Genesis body code first; compare the exact G80 finish path, while G70 and GV80 remain separate confirmation questions.
Match the Genesis body code first
G70, G80 and GV80 need separate sill shapes. The confirmed products shown here cover Genesis G80 I DH 2016–2020. For G70 or GV80, ask us to confirm the exact year and body; neither a G80 sedan nor a Genesis Coupe kit establishes fit.
Genesis G80 I DH · 2016–2020
The exact G80 Stainless and Matte PRO pages identify the first-generation DH sedan for 2016–2020. Compare those two finish paths after confirming the body.
Open the exact product listing
Confirm G80 I DH body and year.
Genesis G70
Keep G70 as its own lookup. Do not use the G80 sedan or Genesis Coupe pages to infer a G70 threshold.
Genesis GV80
Keep GV80 as its own lookup. The G80 products do not establish a GV80 fit, so confirm the year and body before ordering.
The exact G80 pages answer the G80 path. G70 and GV80 need their own product confirmation; a familiar Genesis logo is not enough to transfer sill geometry.
Compare the named G80 product views
These images belong to the named G80 pages. The Matte and Stainless views are finish examples for G80 I DH; they do not answer a G70 or GV80 fitment question.
Keep the G80 year and body evidence visible
| Model path | What the product page says | Before checkout |
|---|---|---|
| Genesis G80 I DH Stainless | Title and description identify 2016–2020. | Confirm G80 I DH body. |
| Genesis G80 I DH Matte PRO | Title and description identify 2016–2020. | Confirm G80 I DH body. |
| Genesis G70 | Keep generation and body code as a separate lookup. | Contact us before choosing a G80 substitute. |
| Genesis GV80 | Keep generation and body code as a separate lookup. | Contact us before choosing a G80 substitute. |
Read the finish and light zones on the exact G80 page
The G80 Stainless page offers COLOR, SET and STYLE selectors and describes the Genesis logo, top light bars and side edge. The G80 Matte PRO page has COLOR BODY, COLOR HIGHLIGHT and SET selectors and its description says only the lettering on the top surface illuminates; the edge and lower surface remain unlit. The Matte page description controls that zone reading even where a catalogue illustration shows other white artwork.
| Product path | Product-level evidence | Buying check |
|---|---|---|
| G80 Stainless | COLOR, SET and STYLE; top bars and side edge are described on this exact page. | Confirm G80 I DH body. |
| G80 Matte PRO | COLOR BODY, COLOR HIGHLIGHT and SET; only the top lettering illuminates, with edge and lower surface unlit. | Use the Matte description for light zones. |
Compare Stainless and Matte on the G80 path
For the same G80 I DH body path, Stainless describes top-and-edge light zones while Matte PRO describes lettering-only illumination with an unlit edge and lower surface. Choose the finish after confirming the body, and keep each page’s set and selector choices separate.
Plan the threshold and wiring route
The G80 Stainless description places adhesive plates on the flat painted-metal threshold and specifies red positive and black negative wires to a suitable vehicle source. A door-activated circuit turns the illumination on when the door opens. The G80 Matte page also says wiring is required, so follow the exact product page rather than treating the finish choice as a different installation path.
- Verify G80 I DH body and year before opening the adhesive.
- Dry-fit the selected Front or Front + Rear set and check door and seal clearance.
- Measure the intended low-voltage circuit and confirm polarity instead of relying on wire colour alone.
- Route the wires beneath trim while keeping the path clear of moving and restraint components.
- Test illumination and door shutoff before final adhesion.
Use the measuring guide and installation guide for preparation, then follow the exact Genesis page.
Continue with the Genesis collection
Browse Genesis LED door sills, then open the exact model and body-code page. If the G70 or GV80 configuration is unclear, contact us before ordering.
